UV ultraviolet paint dry

     I, PU infiltration natural dry form below to talk about the UV ultraviolet drying paint and wood characteristics:

      UV light Chung degrees paint it strong, smooth surface, high hardness, no special smell, the use of UV drying, processing speed, etc.. However, UV paint is dry instant ultraviolet radiation can not penetrate into the timber easy to fall off, especially in the timber of natural expansion, contraction will have a slightly larger than the surface paint to crack, not their own patch. (Because of UV lacquer thinner has destructive reaction) affect the appearance and life.

     Chenbro recommends the following environmental UV light solid paint the floor to pay particular attention to matters: special dry and humid environment users pavement before special strengthening moisture to deal with insulation. Can not be directly related to the impact and weight of the floor finish. Can not be directly related to the impact and weight of the floor finish. Not with UV light solid paint pavement floor room a large number of painting (containing diluent and curing agent combination of paint) because of these two chemical agents will play a broken response to UV finish off. Chenbro about the floor with paint

     Second, with the floor of the booming market, foreign high-quality hardwood timber and a large number of oil imports, gives users the opportunity to imagine the past, but also to the manufacturers a lot more difficult, especially hardwood materials and oily wood paints, because of oily wood and hard wood anti tidal water is not easy, in the paint must be used when processing the natural infiltration PU paint dry, because the infiltration of natural drying paint PU poured behind the scenes in the 12 hours before the infiltration of natural drying, so the processing oily timber, only PU lacquer finish in order to guarantee easy off. PU primer there is a strong permeability and flexibility, could penetrate into the surface of wood inside, to the floor sizing control played a role, it is not easy cracking and finish off. PU topcoat is just soft in the zone, light Chung calm, anti-hit ability, and better wear resistance. PU lacquer has a long reusability, in a number of years later, for repair and re-painting, just ordinary paint can be combined with PU lacquer, but the initial processing of PU it is very difficult to paint, such as the number leaching paint, long production cycle, paint consumption infiltration, workshops for high-precision manufacturing equipment investment, technical and higher cost of production is limited by many problems, so a slower market penetration. Chenbro hope you know more, are used with satisfaction.