Chenbro the successful development of automatic control system with side lamp uv equipment interface controller

 1. Side lamp automatic control system

     Retro-side light-controlled systems, significant savings for the coating process, saving manpower, two side lights can board the width automatically adjust the width of single-chip computer to control the system without manual operation. Uv equipment at any retrofitting or slip-ping machine, coating machine used in combination to save the side lights to adjust the time, which greatly raised the production capacity.

 2.uv Machine Interface Controller

        (1) the realization of the seven full-UV light and semi-open control, and when tired of their functions, while the light zone temperature control of the upper and lower limits.

     (2) the design of the relay are 15 domestic Hongfa brand, contact capacity 250VAC/30VDC, 10A

         (3) temperature probe measuring range -55 to 125 degrees Celsius, with less than one meter cable

     (4) the use of plate separation design, drive plate can be replaced, the use of industrial pluggable terminal

     (5) to substitute the original design of the button, when tired, and temperature control in the table, such as the total cost of the electrical components ￥ 350-400

     (6) As a result of the drive motor manufacturers to adopt different part of the costs and drive higher, so the design of non-motor-driven features.

          (7) Usage: press left and right arrows can choose 0-7 lights, where 0 on behalf of the operation of all lights, 1-7, respectively, to operate on behalf of 1-7 UV lights, choose lights number, the lights when tired and full - semi-open through the indicator instructions, the right temperature digital tube display usually measured temperature, press the button on the upper and lower limits, digital control blinking, you can adjust the upper and lower limits of temperature settings, is set up again by pressing the corresponding upper and lower limits Settings button to withdraw from a state, if the fans to start the indicator instructions. The rest slightly.

      (8) of the first orders for the design of non-PC film with custom development costs Total 1700 ￥ / 3 sets, the official supplier for 600 after the price of ￥ / sets, PC membrane 50 ￥ / sets, the product no one for the damage for free quality Paul March, lifelong maintenance cost.